1 Set the MENU ON/OFF/PAGE switch to ON.
The page that was on the screen when the last menu operation ended appears on the viewfinder screen. (When this menu is first used, the
2 Push the MENU ON/OFF/PAGE switch repeatedly to PAGE until the FUNCTION 2/2 page shown below appears (or use the rotary encoder).
4
?E13*FUNCTION | 2/2 |
|
|
| |
|
|
|
|
| |
GENLOCK |
| : | ON |
|
|
CAM RET. |
| : | OFF |
|
|
FILTER INT. |
| : | OFF |
|
|
FIELD/FRAME |
| : | FLD |
| Function names |
A.IRIS OVERRIDE: | OFF |
| |||
DCCFUNCTION | SEL: | OFF |
|
| |
VTR MODE |
| : | OFF |
|
|
RECINHIBIT(CCU): | ON |
|
| ||
ASSIGNABLE | SW | : | OFF |
|
|
|
|
|
|
|
|
FUNCTION 2/2 page (factory settings)
3 Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM until the cursor reaches the item whose setting you want to change (or use the rotary encoder).
4 Press the rotary encoder, to display a question mark to the left of the display.
5 Turn the rotary encoder to change the setting of the selected function.