1 Set the MENU ON/OFF/PAGE switch to ON.

The page that was on the screen when the last menu operation ended appears on the viewfinder screen. (When this menu is first used, the lowest-numbered one of the currently selected pages appears.)

2 Push the MENU ON/OFF/PAGE switch repeatedly to PAGE until the SETUP CARD page shown below appears (or use the rotary encoder).

4

E11*SETUP

CARD

 

 

 

 

 

 

pREAD(pCAM)

 

Data read message

WRITE(pCARD)

 

 

ID EDIT

 

 

 

WRITE

PROTECT :

OFF

Data write message

WHITE

DATA

READ:

OFF

 

 

 

 

 

 

 

 

Setting of card ID

 

 

 

 

 

 

 

 

 

 

 

PRESS:READ CARD

3

4

SETUP CARD page (factory settings)

If no card is inserted, the message “CARD NOT INSERTED!” message appears. Close the menu and insert a card.

Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM until the cursor reaches the READ (→ CAM) position (or use the rotary encoder).

Press the rotary encoder.

A message asking whether or not data and the card ID of the camera are to be read from the card appears.

Chapter 4 Adjustments and Settings for Recording 4-121