Before using the camcorder, use the MASTER GAIN page of the setup menu to set the gains corresponding to the L, M, and H positions of the GAIN selector and the TURBO GAIN switch, which switches the gain of the video amplifier.
Setting the GAIN selector values
Follow the procedure below to set a gain value for each switch position.
4
1,2,7
4,5,6
3
Setting the GAIN selector values
1 Set the MENU ON/OFF/PAGE switch to ON.
The page that was on the screen when the last menu operation ended appears on the viewfinder screen. (When this menu is first used, the
2 Push the MENU ON/OFF/PAGE switch repeatedly to PAGE until the MASTER GAIN page shown on the next page appears (or use the rotary encoder).
(Continued)
Chapter 4 Adjustments and Settings for Recording