Using the setup card while connecting the remote control unit

When connecting the remote control unit, information can be written to the setup card; reading information, however, is subject to the following restrictions:

When the RM-P9 is connected

After reading from the setup card, the parameter settings on the setup card may be different from the volume setting on the RM-P9. (The values may, however, match by coincidence.) For this reason, there may be a great change in the parameter setting on the setup card even if the

5 volume on the RM-P9 has been changed only slightly.

When the RM-B150 is connected

Even if you read the information from the setup card, the absolute value setting on the setup card will be overwritten by the volume setting on the RM-B150. This, however, can be avoided by setting the volume to relative mode.

5-44Chapter 5 Setting Up the Camcorder