Alarm Recording

Alarm Recording Procedure

When the specified trigger is detected, recording automatically begins.

Recording is executed with the conditions specified with ALARM REC MODE SET on the alarm recording area.

Each time alarm recording is made, the alarm count on the monitor increases by one.

The value returns to 1 when it exceeds 9999.

When you set pre-alarm recording to ON, the HSR-

X200/X200P immediately starts pre-alarm recording when you exit the menu, and continues recording the camera input, overwriting the data in the alarm recording area for the specified duration. When the trigger is detected, it starts regular alarm recording.

During pre-alarm recording, the indicator of the ALARM button lights.

It flashes during alarm recording.

When the alarm recording area becomes full

If overwriting of the alarm recording area has been set to OFF, a warning message will appear on the monitor screen when the remaining capacity drops to the specified value (1% with the default). At the same time, the ALARM FULL indicator flashes, and a warning signal is output from the ALARM FULL terminal on the rear panel.

The overwriting ON/OFF setting and the value of the remaining for warning can be changed with RECORDING CONDITIONS SET of MAIN MENU 1.

For details, see page 46(GB).

Note

If the trigger is detected when normal recording is in progress, alarm recording will be executed without interrupting normal recording.

26 (GB)