Menu Settings

If you logged on with ID3, menu operations are allowed.

Click on (MENU SETTING) to display the Menu Select display and click on the menu item on the display to select it.

Menu settings are achieved with selections from dropdown lists and registration by clicking on SET or SAVE.

1.CLOCK SET: To set the built-in clock of the HSR- X200/X200P.

You can set it in the same procedure as with LANGUAGE/CLOCK SET on the recorder on page 44(GB).

2.SUMMER TIME (DAYLIGHT SAVINGS) SET/ EXT CLOCK SET: To perform the settings required for the summer (daylight-savings) time and external clock adjustment.

You can set the same items as with LANGUAGE/CLOCK SET on the recorder on page 44(GB).

3.VIDEO INPUT/PRE REVERSE: To specify the type of the multiplexer connected to the recorder and the pre-reverse time.

You can set the same items as with VIDEO INPUT/PRE REVERSE on the recorder on page 31(GB) or 39(GB).

4.RECORDING AREA SET: To display the information regarding the recording areas of the built-in hard disk of the HSR-X200/X200P. While you cannot change the area assignment via the network, the AREA FULL RESET buttons are valid.

Operate them in the same manner as with RECORDING AREA SET on the recorder on page 46(GB).

5.RECORDING CONDITIONS SET: To set OVERWRITE function, etc.

You can set the same items as with RECORDING CONDITIONS SET on the recorder on page 47(GB).

6.NORMAL REC MODE SET: To set the conditions for normal recording.

You can set the same items as with NORMAL REC MODE SET on the recorder on page 22(GB).

7.TIMER SET: To set the conditions for timer recording.

You can set them with the same procedure as with TIMER SET on the recorder on page 27(GB).

8.HOLIDAY SET: To specify holidays.

You can specify with the same procedure as with HOLIDAY SET on the recorder on page 28(GB).

9.ALARM REC MODE SET: To set the conditions for alarm recording.

You can set the same items as with ALARM REC MODE SET on the recorder on page 24(GB).

You can also perform the ACTIVITY DETECTION SENSOR settings on the same display.

10.DISPLAY SET: To turn on/off the on-screen data items.

You can set the same items as with DISPLAY/VIDEO LOSS SET on the recorder on page 48(GB).

11.RS-232C/RS-485 SET: To show the information regarding external control settings on RS-232C/RS- 485 SET on the recorder (page 43(GB)). The settings cannot be changed via the network.

12.BUZZER SET: To turn on/off the buzzers.

You can set the same items as with BUZZER SET on the recorder on page 48(GB).

13.NETWORK SET: To perform the settings required for operations via the network.

You can perform the same items as with NETWORK SET on the recorder on page 40(GB) except LAN CARD selection and NETWORK CONTROL ON/OFF.

You can also select NETWORK SPEED from the dropdown list.

14.HDD SET: To display the information regarding the hard disk expansion set on HDD SET on the recorder (page 43(GB)). Only selection of drive for playback is allowed via the network.

15.POWER FAILURE/USED TIME: To display the information of power failure, usage time, and firmware version as POWER FAILURE/USED TIME of the recorder (page 59(GB)).

57 (GB)