Web Operations

1Status display area

Operation mode field: Shows LIVE when the HSR- X200/X200P is in stop status or in a recording mode or PLAY when the HSR-X200/X200P is in playback mode.

Date/time field: Shows the current date and time when the HSR-X200/X200P is in stop status or in a recording mode. In a playback mode, the date and time when the recording was made are displayed.

NORMAL RECORDING MODE field: Shows the status of normal or timer recording that uses the normal recording area.

STOP: No recording is being made.

RECORDING: Normal recording is in progress.

TIMER STANDBY: The unit is in timer- recording standby status.

TIMER RECORDING: Timer recording is in progress.

AREA FULL: The normal recording area is full. ALARM RECORDING MODE: Shows the status of

alarm recording that uses the alarm recording area. STOP: No recording is being made.

PRE ALARM RECORDING: Pre-alarm recording is in progress.

ALARM RECORDING: Alarm recording is in progress.

AREA FULL: The alarm recording area is full. PLAYBACK AREA: Shows the type of data being

played in playback mode. ALARM: Alarm recording

PRE ALARM: Pre-alarm recording

NORMAL: Normal recording

ARCHIVE: Data stored in the archive area SPEED: Shows the playback status in playback mode.

PLAY: Normal playback in the forward direction

PAUSE: Still-Picture mode

CUE: High-speed playback in the forward direction

R.PLAY: Normal playback in the reverse direction

REV: High-speed playback in the reverse direction

2Image view pane

The current image from the camera input is displayed when the HSR-X200/X200P is in stop status or in recording mode. The playback image is displayed when the HSR-X200/X200P is in playback mode. READ INTERVAL: You may select the interval for

reading the images from the dropdown list:

1:1000 ms

2:500 ms

3:250 ms

4:100 ms

5:25 ms

SIZE: You may select the image size from the dropdown list:

1:320 ⋅ 240 pixels

2:400 ⋅ 300 pixels

3:640 ⋅ 480 pixels

4:800 ⋅ 600 pixels

5:1024 ⋅ 768 pixels

6:1280 ⋅ 960 pixels

3CHANNEL selection field (accessible with ID2 or ID3 only)

This field is valid only when a multiplexer whose channel information can be decoded is connected to the HSR-X200/X200P.

Select the channel to be displayed from the dropdown list and click on SET.

52 (GB)