To turn on the sensor on or off

Check cells that correspond to the points on the screen where you wish to activate the sensor.

To turn off the sensor for a cell, click on the cell again to remove the check mark.

Copying and Downloading

If you logged on with ID2 or ID3, you can copy the pictures recorded in the normal or alarm recording area to the archive area of the HSR-X200/X200P and download the data to the hard disk of your PC.

If you try to download data in the normal or alarm recording area directly to your PC, the data are automatically copied onto the archive area of the HSR- X200/X200P for downloading. The data in the archive area can be directly downloaded to your PC.

Copying a picture

1 Display the picture you wish to copy in Still picture.

To copy pictures in series, display the first picture.

2 Click on (COPY).

The Copy Set display appears.

3 Specify the quantity of the images to be copied and click on START.

During copying “COPYING TO ARCHIVE AREA” is displayed.

When copying finished, “COPY FINISHED” is displayed.

To exit Copy mode

Click on (PLAY STOP).

Downloading a picture

1 Display the picture you wish to download in Still picture.

To download pictures in series, display the first picture.

2 Click on (DOWNLOAD).

The Download display appears.

3 Specify the number of the images to be downloaded and click on START.

When a picture in the archive area is displayed, downloading immediately begins.

When a picture in the normal or alarm recording area is displayed, downloading begins after first copying the picture to the archived area of the HSR-X200/X200P.

When downloading is started, the display changes to the Image Viewer (see the next page), enabling you to observe the picture being downloaded.

55 (GB)