Web Operations

The HSR-X200/X200P can be connected to a network via an optional network card and operated through the network.

Operational conditions

To operate the HSR-X200/X200P via a network, use under the following conditions.

PC: Pentium III 400 MHz, 64 MB or more

OS: Windows 95/Windows 98/Windows Me/ Windows NT 4.0 ServicePack 5 or higher/ Windows 2000

Web browser: Internet Explorer 5.0 or higher

For the connections and the preparatory settings on the HSR-X200/X200P, see “Network Connection and Associated Settings” on page 40(GB).

Accessing the Recorder

1 Start Internet Explorer.

2 Type the following in the Address box and press the Enter key.

http://<IP address for the HSR-X200/X200P>/

The IP address for the HSR-X200/X200P is the one that has been set with NETWORK SET of MAIN MENU 2.

The Network Password input window opens.

3 Type ID1, ID2, or ID3 in the ID box and the corresponding password set with NETWORK SET in the Password box.

Notes

The operations via the network are limited depending on the password you entered.

If you accessed with the password for ID1: You

are enabled only to view the current camera input.

If you accessed with the password for ID2: You are enabled to view the current camera input or playback picture and perform operations related to playback and data storage. Recording and menu operations are not allowed.

If you accessed with the password for ID3: You are enabled to perform operations using all the browser buttons.

If you accessed with ID1 or ID2 and try to perform an operation not allowed, a warning message will be displayed.

4 Click on OK.

When the password is verified, the SELECT LANGUAGE display for the HSR-X200/X200P is displayed.

Notes

•If you try to access an HSR-X200/X200P on which anther PC has logged, the message “THE UNIT IS BUSY!” will be displayed.

•If you try to access an HSR-X200/X200P which does not permit connection, the message “ THE UNIT IS NOT READY!” will be displayed.

5 Click on the radio button of the desired language and click on SET.

The Web Operations display for the HSR-X200/ X200P (see the next page) appears.

50 (GB)