Preparations

On-Screen Data Selection

You may independently turn on/off the on-screen data superimposed on the images on the monitor screen. Use DISPLAY/VIDEO LOSS SET of MAIN MENU 2.

For details on the on-screen data items, see “On-Screen Data” on page 16(GB).

1 Press the MENU button to display MAIN MENU 1 and press the MENU button again to switch to MAIN MENU 2.

2 Select 1. DISPLAY/VIDEO LOSS SET.

The DISPLAY/VIDEO LOSS SET display appears.

<DISPLAY SET>

DATE

 

: ON

TIME

 

: ON

QUALITY

: ON

REC CYCLE

: ON

ALARM

COUNT

: ON

ALARM

TYPE

: ON

<VIDEO LOSS

SET>

VIDEO

LOSS

: ON

3 Highlight the item to be set and turn Shuttle dial clockwise.

The current setting flashes.

4 Turn the Jog dial to change the ON/OFF setting and turn the Shuttle dial clockwise to register your setting.

Repeat steps 3 and 4 for each item to be set.

By setting VIDEO LOSS to ON, a warning message will be displayed on the monitor screen if no video input signal is supplied to the unit.

5 When the settings are completed, press the EXIT/ OSD button to exit the menu.

Buzzer Settings

You may independently turn on/off the buzzers for warning.

Use BUZZER SET of MAIN MENU 2.

1 Press the MENU button to display MAIN MENU 1 and press the MENU button again to switch to MAIN MENU 2.

2 Select 3. BUZZER SET.

The BUZZER SET display appears.

 

<BUZZER

SET>

ALARM

: ON

DISK

FULL

: ON

DISK

ERROR

: ON

LOCK

WARNING

: ON

KEY

IN

: OFF

NON

REC

: OFF

ALARM: Buzzer that sounds when an alarm is generated

DISK FULL: Buzzer that sounds when the remaining of the normal recording or alarm recording area drops below the specified value.

DISK ERROR: Buzzer that sounds when an error is generated for the hard disk

LOCK WARNING: Buzzer that sounds when an operation key is pressed with the security lock active.

KEY IN: Buzzer that sounds when an operation key is pressed

NON REC: Buzzer that sounds when recording is interrupted

3 Highlight the buzzer to be set and turn Shuttle dial clockwise.

The current setting flashes.

4 Turn the Jog dial to change the ON/OFF setting and turn the Shuttle dial clockwise to register your setting.

Repeat steps 3 and 4 for each buzzer to be set.

5 When the settings are completed, press the EXIT/ OSD button to exit the menu.

48 (GB)