To charge the phone

1Plug the phone charger into a power outlet.

2Plug one end of the USB cable into the charger (or into the USB port of a computer).

3Plug the other end of the cable into the micro USB port on your phone, with the USB symbol facing up. The battery status LED lights up when charging starts. If the battery is completely discharged, it may take a few minutes before the LED lights up after you connect the phone charger cable to a power source.

4When the battery status LED is green, the phone is fully charged. Disconnect the USB cable from your phone by pulling it straight outwards. Make sure not to bend the connector when removing the cable from the phone.

Use the charger and USB cable provided with the phone to ensure faster charging.

Battery LED status

Green

The battery is fully charged

 

 

Flashing red

The battery level is low

13

This is an Internet version of this publication. © Print only for private use.

Page 13
Image 13
Sony LT30at manual Battery LED status, To charge the phone