To turn on face detection
1Activate the camera.
2If the still camera is not selected, drag to .
3Tap the icon on the top left, then select Normal.
4To display all settings, tap .
5Tap Focus mode > Face detection.
To take a photo using face detection
1When the camera is open and Face detection turned on, point the camera at
your subject. Up to five faces can be detected, and each detected face is
framed.
2Press the camera key halfway down. A green frame shows which face is in
focus.
3To take the photo, press the camera key fully down.
Smile detection
Smile detection allows you to capture a face just as it smiles. The camera detects up
to five faces and selects one face for smile detection and auto focus. A green frame
shows which face is selected. When the selected face smiles, the camera
automatically takes a photo.
To turn on smile detection
1Activate the camera.
2If the still camera is not selected, drag to .
3To display all settings, tap .
4Tap Smile detection and select a smile level.
To take a photo using smile detection
1When the camera is open and Smile detection is turned on, point the camera
at your subject. Each detected face is framed in the viewfinder (not more than
five faces).
2The camera selects which face to focus on.
3The face selected appears inside a green frame and the photo is taken
automatically.
4If no smile is detected, press the camera key to take the photo manually.
Adding the geographical position to your photos
Turn on geotagging to add the approximate geographical location (a geotag) to
photos when you take them. The geographical location is determined either by
wireless networks (mobile or Wi-Fi® networks) or GPS technology.
When appears on the camera screen, geotagging is turned on but the
geographical position has not been found. When appears, geotagging is turned on
and the geographical location is available, so your photo can get geotagged. When
neither of these two symbols appears, geotagging is turned off.
To turn on geotagging
1Activate the camera.
2If the still camera is not selected, drag to .
3Tap , then tap Geotagging > On.
4Tap OK to agree to enable GPS and/or wireless networks.
5Check the options you want to select under Location services.
6After you confirm your settings, press to return to the camera screen.
7If appears on the camera screen, your location is available and your photo
can get geotagged. If not, check your GPS and/or wireless network
connection.
92
This is an Internet version of this publication. © Print only for private use.