(1)Select a number to register with v / V and press ENTER.

The cursor (B) appears on the display panel.

(2)Press v / V to move the cursor (B) to the gain item that you want to set and press ENTER. The following menu appears on the display panel.

C O L O R T E M P

:

 

1

R E D G A I N

 

:

1 2 8

(3)Adjust the gain (0 to 255) with v / V and press MENU.

The menu returns to the COLOR TEMP menu.

The PFM-42B1/42B1E variable range is 10 to 255.

(4)Repeat steps (2) and (3) to set the other gain items and press MENU.

The menu returns to the COLOR TEMP menu.

When you rename the adjusted color temperature, follow the steps below.

(5)Press v / V to move the cursor (B) to “NAME SET” and press ENTER.

The following menu appears on the display panel.

C O L O R T E M P

: [

1 ]

N A M E S E T : [ – ⋅ ⁄ =± 0 1 2 3 4 ]

S E L E C T

S E T ENTER

E N D MENU

Character list

(6)Select the character to be changed with v / V and press ENTER.

The background of a character in the character list changes to cyan.

Adjusting the Picture

(7) Select a character in the character list with

v/ V and press ENTER.

The selected character is input.

(8)Repeat steps (6) and (7) until you finish inputting the name, then press MENU.

The menu returns to the COLOR TEMP menu.

SHARPNESS

You can change the outline correction level to one of three levels (HIGH, MID or LOW).

1 Press v / V to move the cursor (B) to “SHARPNESS” and press ENTER.

2 Select the outline correction level with v / V and press ENTER.

HIGH: sharper picture

MID: standard value

LOW: softer picture

Notes

•CHROMA and PHASE controls do not function with an RGB signal.

•PHASE control does not function with a component signal.

•PHASE control does not function with a PAL or SECAM color source.

•Do not change the CHROMA/PHASE (NTSC only) level when the selected signal is black-and-white. Although it has no effect on the current picture, it does affect the picture of color signals such as NTSC or PAL which may be input later.

•While you are adjusting CONTRAST, BRIGHTNESS, CHROMA, or PHASE, the value displayed on the display panel is not synchronized with the change.

Restoring the PIC CONTROL Menu Items to Their Original Settings

1 In the PIC CONTROL menu, Press v / V to move

the cursor (B) to “RESET” and press ENTER. The following menu appears on the display panel.

R E S E T

:

N O

S E L E C T

S E T ENTER

E N D MENU

29 (GB)