Watching the Picture

Input Signal and Display Status Information

Input signal and display status information appears on the display panel for about five seconds when the power is turned on or when switching the input signal. To disable this function, follow the steps below.

1 In the CONFIG (1/2) menu, press v / V to move the cursor (B) to “DISPLAY” and press ENTER. The following menu appears on the display panel.

D I S P L A Y

:

O N

2 Press v / V to set DISPLAY to OFF and press

ENTER.

The DISPLAY function is disabled.

To display the information

Set DISPLAY to ON in step 2 above. The factory default is ON.

Note

You can display the input signal information and the time anytime by pressing the DISPLAY button on the Remote Commander, regardless of the above setting. The display lasts until you press the DISPLAY button again to hide it.

The input signal information list

Color system or horizontal/vertical frequency

Signal type

Time

 

 

3 1 . 5 k H z / 6 0 H z

1 6 : 3 0 : 4 0

I N P U T 1 R G B

 

 

 

26 (GB)