Watching the Picture

Watching the Picture

Before you start

•Turn on the display.

•Turn on the connected equipment and play a video source.

•To display the input signal information on the screen when turning on the power or switching the input signal, set “DISPLAY” in the CONFIG (1/2) menu to ON.

•To select the on-screen language used in the menu, see page 36 (GB).

Switching the Input Signal

1 Press MENU.

The main menu appears on the display panel.

M A I N

M E N U

 

 

I N P U T S E L E C T

 

 

P I C

C O N T R O L

 

 

P I C

S I Z E

 

 

C O N F I G

 

 

M E M O R Y

 

 

R E M O T E

 

 

S T A T U S

 

 

S E L E C T

S E T ENTER

E N D MENU

 

 

 

 

2 Press v / V to move the cursor (B) to “INPUT SELECT” and press ENTER.

The currently selected input signal and INPUT SELECT menu appear on the display panel.

P A L

 

 

V I D E O C O M P O S I T E

 

I N P U T S E L E C T

 

I N P U T 1

R G B

 

I N P U T 1

Y U V

 

I N P U T 2

R G B

 

I N P U T 2

Y U V

 

V I D E O

C O M P O S I T E

 

V I D E O

Y / C

 

S E L E C T

S E T ENTER

E N D MENU

 

 

 

3 Press v / V to move the cursor (B) to the input source to be displayed and press ENTER. INPUT1 RGB: Selects the audio and video signal

input from the INPUT1 connectors when the input signal is an RGB signal.

INPUT1 YUV: Selects the audio and video signal input from the INPUT1 connectors when the input signal is a component signal.

INPUT2 RGB: Selects the audio and video signal input from the INPUT2 connectors when the input signal is an RGB signal.

INPUT2 YUV: Selects the audio and video signal input from the INPUT2 connectors when the input signal is a component signal.

VIDEO COMPOSITE: Selects the audio and video signal input from the COMPOSITE IN connector and AUDIO IN jack among the VIDEO connectors.

VIDEO Y/C: Selects the audio and video signal input from the Y/C IN connector and AUDIO IN jack among the VIDEO connectors.

(For the PFM-42B1E/42B2E, VIDEO COMPOSITE and VIDEO Y/C only appear when the BKM-B10 video input adaptor or BKM-B13 video input & control S adaptor (not supplied) is installed.)

INPUT3 RGB: Selects the input signal (RGB signal) from the device connected to the INPUT 3 connector. (Only when the BKM-B12 component adaptor is installed.)

INPUT3 YUV: Selects the input signal (Component signal) from the device connected to the INPUT3 connector. (Only when the BKM-B12 component adaptor is installed.)

INPUT3 PC: Selects the signal from the BKM- B30NW network adaptor installed in the VIDEO connector unit.

(Only when the BKM-B30NW network adaptor is installed.)

The selected input signal appears on the display panel.

Color system or horizontal/vertical frequency

Signal type

P A L

V I D E O C O M P O S I T E

You can also switch the input signal using the Remote Commander.

Note

We recommend input source video equipment equipped with a TBC (time base corrector). If the display receives a signal without TBC, the picture may disappear due to disturbance of the sync signal.

24 (GB)