Adjusting the Picture

Adjusting the Picture

While watching the picture, you can adjust contrast, brightness, chroma, phase, and so on, to suit your taste. The adjustments can be carried out for each input signal separately. You can also store the adjusted levels in memory.

Adjusting the Contrast, Brightness, Chroma, and Phase, etc.

Press MENU so that the main menu appears on the display panel and select “CONTRAST”, “BRIGHTNESS”, “CHROMA”, “PHASE”, “PICTURE AGC”, “COLOR TEMP” or “SHARPNESS” from the PIC CONTROL menu with

v/ V.

PHASE

Select “PHASE” with v / V and press ENTER. Adjust the phase with v / V in the range from MIN (–50) to MAX (+50).

v: to make the overall picture greenishV: to make the overall picture purplishAutomatic brightness control — Enhancing the image contrast

If the average brightness of the image is low, the system can automatically raise the contrast level to enhance the brightness. This function works well for displaying dark images.

Select “PICTURE AGC” with v / V and press ENTER. Set PICTURE AGC to ON or OFF with v / V.

CONTRAST

Select “CONTRAST” with v / V and press ENTER. Adjust the contrast with v / V in the range from MIN

(0) to MAX (+100).v: to increase picture contrastV: to decrease picture contrastBRIGHTNESSSelect “BRIGHTNESS” with v / V and press

ENTER.

Adjust the brightness with v / V in the range from MIN (–50) to MAX (+50).v: to make the picture brighterV: to make the picture darker

CHROMA

Select “CHROMA” with v / V and press ENTER. Adjust the chroma with v / V in the range from MIN (–50) to MAX (+50).

v: to increase color intensityV: to decrease color intensity
COLOR TEMP (Color temperature)

You can also set the color temperature. You can select HIGH or LOW, or adjust each gain more precisely. Up to six adjusted color temperatures can be registered. You can rename them (up to six characters in length).

1 Select “COLOR TEMP” with v / V and press

ENTER.

2 Select the color temperature with v / V and press

ENTER.

HIGH: to set the color temperature to highLOW: to set the color temperature to low1 – 6: to set the gain more preciselyWhen you select HIGH or LOW, the menu returns to the PIC CONTROL menu.When you select “1” to “6”When you select “1” to “6”, the following menu appears on the display panel.

C O L O R T E M P

:

 

1

R E D G A I N

 

:

1 2 8

G R E E N G A I N

 

:

1 2 8

B L U E

G A I N

 

:

1 2 8

N A M E

S E T

 

 

 

S E L E C T

A D J U S T ENTER

E N D MENU

The PFM-42B1/42B1E displays “255” for each gain.

28 (GB)