Controlling Power On/Off Automatically (Power Control Function)

On Timer Function (PFM-42B2/ 42B2E only)

1 When the Step 4 screen in the ON/OFF TIMER function is displayed, select ON with v / V and press ENTER.

The following menu appears on the display panel.

O N / O F F

T I M E R

:

 

O N

T I M E R M O D E

 

:

O N

O N T I M E

 

:

0 0 : 0 0

O F F

T I M E

 

:

- - : - -

S E L E C T

A D J U S T ENTER

E N D MENU

2 Press v / V to select “ON TIME” and press

ENTER.

The following menu appears on the display panel. The area behind the hour is displayed in cyan.

O N / O F F T I M E R

:

 

O N

O N T I M E

 

:

1 6 : 3 0

S E L E C T

S E T ENTER

E N D MENU

3 Press v / V to set the hour and press ENTER. The time is entered and the area behind the minute is displayed in cyan.

4 Press v / V to set the minute and press ENTER. If the system turns off the power and goes into the standby mode, the ON indicator flashes.

Off Timer Function (PFM-42B2/ 42B2E only)

1 When the Step 4 screen in the ON/OFF TIMER function is displayed, select OFF with v / V and press ENTER.

The following menu appears on the display panel.

O N / O F F

T I M E R

:

 

O N

T I M E R M O D E

 

:

O F F

O N T I M E

 

:

- - : - -

O F F

T I M E

 

:

0 0 : 0 0

S E L E C T

A D J U S T ENTER

E N D MENU

2 Press v / V to select “OFF TIME” and press

ENTER.

The following menu appears on the display panel. The area behind the hour is displayed in cyan.

O N / O F F

T I M E R

:

 

O N

O F F

T I M E

 

:

2 0 : 0 0

S E L E C T

S E T ENTER

E N D MENU

3 Press v / V to set the hour and press ENTER. The time is entered and the area behind the minute is displayed in cyan.

4 Press v / V to set the minute and press ENTER. The display unit changes to the wait mode when the power-off timer turns off.

Notes

•The power saving function does not work when the signal is input from the VIDEO connectors.

•If the sync signal is not connected to the 13th pin of the RGB/YUV (D-sub 15-pin) connector in the INPUT1 or INPUT2 connectors, the display unit does not turn on even if the sync signal is input. Be sure to set POWER SAVING to OFF when only an RGB signal is connected.

•The power saving function, on/off timer function and power off function in the PIC INVERSION mode cannot be used simultaneously. When one of those functions is set to ON (YES), “– – – –” appears next to the others and their functions are not available.

•If you set ON TIME and OFF TIME to the same time, the setting of ON TIME takes priority over that of OFF TIME. The display unit does not turn off at the OFF TIME.

•The power saving function does not work when the YUV(component) signal is input.

42 (GB)