Connections

Connections

Connecting the AC Power Cord

1 Plug the AC power cord into the AC IN socket. Then, attach the AC plug holder (supplied) to the AC power cord.

AC IN socket

AC power cord

 

 

AC plug holder

2 Slide the AC plug holder over the cord until it connects to the AC IN socket cover.

AC IN socket cover

To remove the AC power cord

After squeezing the AC plug holder and freeing it, grasp the plug and pull out the AC power cord.

Attaching the ferrite core (PFM- 42B2/42B2E only)When attaching to the AC power cord

Before connecting the power cord to the unit, be sure to attach the supplied ferrite cores (1ight gray) to the power cord.

1 Attach the ferrite cores to both ends of the AC power cord and close the ferrite cores until they click.

Within 10 mm (13/32 inch)

Within 10 mm (13/32 inch)

2 Wind the stopper round the cord so that the ferrite cores do not slide.

Within 10 mm (13/32 inch)

Within 10 mm (13/32 inch)

3 Tighten the stopper and cut the surplus.

Note

You are cautioned that this unit will not be in compliance with the EMC limits unless the ferrite core is installed on the AC power cord.

14 (GB)