Note

When you set the number, use the buttons on the display unit.

For details about the index number, see “Operating a Specific Display With the Remote Commander” on page 45 (GB).

es REMOTE MODESelects the Remote Commander mode.TV: The Sony display’s or the TV’s commanderPJ: The Sony projector’s commanderOFF: Disables the remote control.

Note

When you change the Remote Commander mode, use the buttons on the display unit. You cannot change the Remote Commander mode with the Remote Commander.

For details, see “Using Other Remote Commander Models” on page 47 (GB).

ed REMOTE ONLY

Select ON to disable the control buttons on the display unit. The display can only be controlled with the Remote Commander.

To cancel the REMOTE ONLY mode, set REMOTE ONLY to OFF with the Remote Commander, or press the MENU button while pressing the 1 (standby) switch on the display unit. The display turns to the standby mode and the REMOTE ONLY mode is cancelled.

The setting in this item is still retained when the AC power cord is disconnected or when you turn the display on/off with the Remote Commander.

STATUS menuThis menu is used for displaying the internal status of the display unit.

 

 

 

 

 

 

 

ef

 

S T A T U S

 

 

 

 

 

M O D E L N A M E

:

P F M - 4 2 B 2 E

 

eg

 

 

 

S E R I A L N o .

:

2 0 0 0 0 0 1

 

 

 

O P E R A T I O N

:

0 0 0 0 0 1 H

 

eh

 

 

 

S O F T W A R E

:

Ver 1 . 0 0

 

 

 

 

ej

 

T E M P E R A T U R E

:

O K

 

 

 

F A N

:

O K

 

 

 

 

ek

 

 

 

 

 

 

 

 

 

 

 

 

el

 

 

 

 

 

 

 

 

 

ef MODEL NAMEIndicates the model name.

The description in this section is based on the PFM-42B2E.

Using On-screen Menus

eg SERIAL No.Indicates the serial number.eh OPERATIONIndicates the total number of hours of operation.

Note

The standby mode is not counted as part of the OPERATION time.ej SOFTWAREIndicates the system software version.ek TEMPERATUREIndicates whether the internal temperature of the display unit is normal.OK: NormalNG: Unusual

When the internal temperature is unusual, NG is displayed and the item flashes in red. The STANDBY indicator on the 1 (standby) switch / indicator section also flashes.

Note

The “TEMPERATURE NG” message may appear when the ventilation holes are blocked or the display unit is installed in a poorly ventilated location. In this case, check that the ventilation holes are not blocked and install the display unit in a well ventilated location. If the message is still shown, contact your authorized Sony dealer.

When the STANDBY indicator flashes or NG is indicated, see “Self-diagnosis Function” on page 45 (GB).

el FAN

Cooling fans are built into this display unit. This item indicates whether the cooling fans work properly.

OK: Normal

NG: Unusual

When the cooling fans are not working normally, NG is displayed and the item flashes in red. The STANDBY indicator on the 1 (standby) switch / indicator section also flashes.

Notes

•When the “FAN NG” message appears, contact your authorized Sony dealer.

When the STANDBY indicator flashes or NG is indicated, see “Self-diagnosis Function” on page 45 (GB).

•The cooling fans detect the display unit’s internal temperature and control the fan rotation. If the ambient temperature is high, the fan speed increases and the fan noise will be louder.

23 (GB)