Reducing Afterimage/Ghosting (Screen Saver Function)

When you select AUTO, the following menu appears.

P I C I N V E R S I O N :

A U T O

S T A R T T I M E

:

1 6 : 3 0

E N D T I M E

:

1 6 : 4 5

P O W E R O F F

:

N O

S E L E C T

A D J U S T ENTER

E N D MENU

(1)Press ENTER.

The cursor (B) appears on the display panel.

Notes on “PIC INVERSION (Picture Inversion)” of “SCREEN SAVER”

If the displayed image appears as an image like a film negative, “PIC INVERSION (Picture Inversion)” of “SCREEN SAVER” may be set to “AUTO,” or “ON.” To return to a normal image, select “OFF” or reset the specified time in “AUTO.”

PIC INVERSION (Picture Inversion) inverts the tint of the picture (Example: white to black, black to white) and corrects the image retention (afterimage) with displayed image on. The image looks like a film negative during picture inversion. This is not a malfunction.

(2)Press v / V to move the cursor (B) to “START TIME” and press ENTER. The following menu appears and the background of the hour is displayed in cyan.

P I C I N V E R S I O N

:

A U T O

S T A R T T I M E

 

:

1 6 : 3 0

S E L E C T

S E T ENTER

E N D MENU

(3)Set the hour when the image is to be reversed with v / V and press ENTER.

The setting for the hour is entered and the background of the minute is displayed in cyan.

(4)Set the minute with v / V and press MENU. The setting for the minute is entered and the menu returns to the PIC INVERSION menu.

(5)Similarly, set the time when the PIC INVERSION function is to be cancelled. The display image will be reversed at the START TIME and will return to the original display image at the END TIME. This cycle is carried out automatically once a day.

To set the change to the standby mode at theEND TIME

1 After selecting AUTO for PIC INVERSION mode, select POWER OFF and press ENTER. The following menu appears on the display panel.

P I C I N V E R S I O N :

A U T O

 

P O W E R O F F

:

N O

S E L E C T

S E T ENTER

E N D MENU

2 Select YES with v / V and press MENU. The display changes to standby mode at the designated END TIME.

Notes

•The power off function, power saving function and on/off timer function in the POWER CONTROL menu cannot be used simultaneously. When one of those functions is set to ON (YES), “– – – –” appears next to the others and their functions are not available.

•If you set START TIME and END TIME to the same time, the setting of START TIME takes priority over that of END TIME. The display image does not return to the original image at the END TIME.

•If you set START TIME of PIC INVERSION and ON TIME of ON/OFF TIMER to the same time, PIC INVERSION will not be activated when the power automatically turns on.

Changing the Image Position Automatically

1 In the SCREEN SAVER menu, press v / V to move the cursor (B) to “PIC ORBITING” and press ENTER.

38 (GB)