Sony SDM-X52 manual Selecting the input signal, Press the Input button

1Grasp the lower middle part of the LCD panel while holding the display stand, then, tilt the LCD panel adequately backward.

Selecting the input signal

(INPUT button)

Press the INPUT button.

The input signal change each time you press this button as follows.

2Grasp the lower sides of the LCD panel, then adjust screen tilt.

3Grasp the lower sides of the LCD panel, then adjust screen height.

On-screen	Input indicator	Input signal
message	lights up	configuration
(Appears about
5 seconds on
the upper left
corner.)
INPUT1: DVI-D	INPUT1	DVI-D input
		connector (digital
		RGB) for INPUT1
INPUT1: HD15	INPUT1	HD15 input
(SDM-X72/X82		connector (analog
only)		RGB) for INPUT1
INPUT2: HD15	INPUT2	HD15 input
			GB
		connector (analog
		RGB) for INPUT2

Selecting the input signal for the audio input jack

See “ (AUDIO SELECT)” on page 16.

11