18
D:\###Sagyou\07 July\0709(TUE)-Night\821296S SDM-X52X72X82\4089157231 SDM-
X52X72X82\01GB-SDMX52AEP\01GB02BAS-AEP.fm masterpage:Left
SDM-X52/X72/X82
4-089-157-23(1)

Reducing the power consumption

(ECO mode)

If you press the ECO button on the front of the monitor, the
backlight level reduces and the power consumption is reduced.
The ECO: ON menu appears on the screen and the backlight level
is reduced. The menu automat i cally disappears after about 5
seconds.
To cancel the ECO mode
Press the ECO button again.
The ECO: OFF menu appears on the screen and normal backlight
lebel is set. The menu automatically disappears after about 5
seconds.

Automatic pictur e quality

adjustment function (analog RGB

signal only)

When the monitor receives an input signal, it

automatically adjusts the picture’s position and

sharpness (phase/pitch), and ensur es that a clear

picture appears on the screen.

The factory preset mode

When the monitor receives an input signal, it automatically
matches the signal to one of the factory preset modes stored in the
monitor’s memory to provide a high quality picture at the center
of the scre en. If th e input si gnal ma tches the factory pr eset mo de,
the picture is appears on the screen automatically with the
appropriat e default adjust ment.

If input signals do not match one of the factory

preset modes

When the monitor receives an input signal, the automatic picture
quality adjustment function of this monitor is activated and
ensures that a clear picture always appears on the screen (within
the following monitor frequency ranges):
Horizontal fre quency: 28 – 61 kHz (SDM-X52)
28 – 92 kH z (SDM-X72/X82)
Vertical frequency: 56 – 75 Hz (SDM-X52)
56 – 85 Hz (S DM-X72/X82)
Consequently, the first time the monitor receives input signals
that do not match one of the factory preset modes, the monitor
may take a longer t ime than normal for di splaying the pictur e on
the screen. This adjustment data is automatically stored in
memory so that next time, the monitor will function in the same
way as when the monitor receives the signals that match one of
the factory preset modes .

If you adjust the phase, pitch, and pictures

position manually

For some input signals, the automatic picture quality adjustment
function of this monitor may not completely adjust the picture
position, phase, and pitch. In this case, you can manually set these
adjustments (page 13). If you manually set these adjustments,
they are stored in memory as user modes and aut omatically
recalled whenever the monitor receives the same input signals.
ECO ON
:
,
Press the ECO button
ECO OFF
:
,
Press the ECO button