Sony SDM-X52 manual Setup 5Bundle the cords and cables, Setup 6 Turn on the monitor and computer

Setup 5:Bundle the cords and cables

1Remove the arm cover.

2Bundle the cords and cables inside of the stand.

3Secure the cables and cords with the cable holder.

4Replace the arm cover and back cover.

1

arm cover

Hold at this point.

Setup 6: Turn on the monitor and computer

1Press the MAIN POWER switch on the left side of the monitor in the direction of [.

The 1 (power) indicator lights up in red.

MAIN POWER

lights in red

2

4

3

Note

back cover

2Press the 1 (power) switch on the front right of the monitor.

The 1 (power) indicator lights up in green.

GB

lights in green

3	Turn on the computer.
4	Press the INPUT button repeatedly and select the

If you cannot bundle all of the cords and cables inside the stand, leave them hanging down outside the stand.

desired input signal.

The selected input signal indicator lights up and the picture

appears on the screen.

For more information, see “Selecting the input signal (INPUT

button)” on page 11.

The installation of your monitor is complete. If necessary, use the monitor’s controls to adjust the picture (page 12).

(continued)

9