Sony SDX-800V/R manual That is not mechanically

LOG SENSE 6.Command Specification

Code	Flag	Type	Flag Type	Recommended application client message		Probable cause
2Bh	Loader Door	O	C	The operation has failed because the autoloader		Tape changer door
				door is open:		open
				1.	Clear any obstructions from the autoloader
				door.
				2.	Eject the magazine and then insert it again.
				3.	If the fault does not clear, turn the autoloader
				off and then on again
				4.	If the problem persists, call the tape drive
				supplier helpline.
2Ch	Loader	O	C	The autoloader has a hardware fault:		The loader mechanism
	Hardware C			1.	Turn the autoloader off and then on again.	has a hardware fault
				2.	Restart the operation.	that is not mechanically
				3.	If the problem persists, call the tape drive	related.
				supplier helpline.
				Check the autoloader users manual for device
				specific instructions on turning the device power
				on and off.
2Dh	Loader	O	C	The autoloader cannot operate without the		Loader magazine not
	Magazine			magazine.		present
				1.	Insert the magazine into the autoloader
				2.	Restart the operation.
2Eh	Loader	O	W	A hardware failure of the changer mechanism is		Predictive failure of
	Predictive			predicted.		loader mechanism
	Failure			Call the tape drive supplier helpline.		hardware
32h	Lost	O	W	Media statistics have been lost at some time in		Drive or library powered
	Statistics				the past	down with tape loaded
33h	Tape	O	W	The tape directory on the tape cartridge just		Error prevented the tape
	directory			unloaded has been corrupted.		directory being updated
	invalid at			File search performance will be degraded		on unload.
	unload			The tape directory can be rebuilt by reading all the
				data.
36h	No start of	O	C	The start of data could not be found on the tape:		Tape damaged, bulk
	data			1.	Check you are using the correct format tape	erased, or incorrect
				2.	Discard the tape or return the tape to your	format
					supplier

SONY AIT-3Ex drive SDX-800V series Ver.1.1 6-23