Notes

•You cannot use the FRONT SPEAKERS B terminals for a bi-amplifier connection.

•When you use the auto calibration function, make the bi-amplifier settings before you perform auto calibration.

•If you make the bi-amplifier settings, the speaker level, balance, and equalizer settings of the surround back speakers become invalid, and those of the front speakers are used.

•Signals output from the PRE OUT jacks are used with the same settings as those of the SPEAKERS terminals.

Using the CONTROL S Control System

If you have a CONTROL S-compatible Sony TV, satellite tuner, monitor, DVD player or VCR, use a CONTROL S connecting cord (not supplied) to connect the CTRL S IN (for TV, satellite tuner, or monitor) or CTRL S OUT (for VCR, etc.) jack on the receiver to the appropriate CONTROL S jack on the respective component. Refer to the operating instructions supplied with your TV, satellite tuner, monitor, VCR, etc., for details.

If you connect the CTRL S OUT jack on another component to the CTRL S IN jack on this receiver

Example

TV, VCR, tuner, monitor, etc.

Receiver

Remote

The remote sensor on the CTRL S OUT component receives remote codes the same way as the remote sensor on this receiver. This is useful if you have placed this receiver in a rack, etc.

Operations Other

continued

105GB