Also, the distance between the surround speakers/ surround back speakers and the listening position

Ccannot be more than 4.5 meters (15 feet) closer

than the distance between the listening position and the front speakers A. Place the speakers so that the difference in the length of C in the

following diagram is no more than 4.5 meters (15 feet) closer than the length of A.

Example: Adjust the distance C to 1.5 meters (5 feet) or more when the distance A is 6 meters (20 feet).

This is important because incorrect speaker placement is not conductive to the enjoyment of surround sound. Place note that placing the speakers closer than the required will cause a delay in the output of the sound from that speaker. In other words, the speaker will sound like it is farther away.

xSP POSI.

(Surround speaker position)

Lets you specify the location of your surround speakers for proper implementation of the surround effects in the Cinema Studio EX modes (page 77). This setup item is not available when the surround speakers are set to “NO” (page 69).

Operations Amplifier

x DISTANCE UNIT (Distance unit)

Lets you select the unit of measure for setting distances.

• feet

The distance is displayed in feet.

•meter

The distance is displayed in meters.

• SIDE/LOW

Select if the location of your surround speakers corresponds to sections A and C.

• SIDE/HIGH

Select if the location of your surround speakers corresponds to sections A and D.

• BEHD/LOW

Select if the location of your surround speakers corresponds to sections B and C.

• BEHD/HIGH

Select if the location of your surround speakers corresponds to sections B and D.

continued

71GB