You can enter a name of up to 8 characters for inputs and display it on the receiver’s display. This is convenient for labeling the jacks with the names of the connected components.
1
2
3
1 Press the input button to select an input you want to create an index name for.
You can also use INPUT SELECTOR on the receiver. The selected input appears on the display.
To select a component connected to the HDMI IN1/2 jack, press the HDMI button repeatedly.
2 Press RECEIVER.
Receiver operation is enabled.
3 Press MENU.
The list of setting menus appears.
4 Press V/v repeatedly to select “Tuner Settings,” “Audio Settings,” “Video Settings,” or “Auto Calibration.”
5 Press 
to enter the menu.
6 Press V/v repeatedly to select “NAME IN ?” or “A.CAL NAME?,” then press 
to enter.
The cursor flashes and you can select a character.
Press V/v to select a character, press B/b to select the position in which to enter the selected character.
To enter a blank space
Press B/b without inputting a character. You can also turn +/– on the receiver until a blank space appears on the display.
If you made a mistake
Press B/b until the character you want to change flashes, then turn +/– on the receiver to select the correct character.
Tip
You can select the character type by pressing
V/v.
Alphabet (upper case) t Alphabet (lower case) t Numbers t Symbols
7 Press 
to enter the name.
The entered name is registered.
92GB