Clearing all the contents of the remote’s memory
1
1,2
1 Press and hold MASTER VOL – first, then press ?/1 and then AV ?/1.
The RM SET UP button flashes three times.
2 Release MASTER VOL
All the contents of the remote’s memory (i.e., all the programmed data) are cleared.
Changing button assignments (RM-AAU008
only)You can change the factory settings of the input buttons to suit the components in your system. For example, if you connect a DVD player to the VIDEO 2 IN jacks on the receiver, you can set the VIDEO 2 button on this remote to control the DVD player.
Note, however, that the settings of the TUNER button cannot be changed.
1
| 2,3 |
|
| 4 | the Using |
|
| |
1 | Press RM SET UP for more than | Remote |
|
2 seconds.
The indicator lights up.
2 Press the input button of which you want to change the assignment.
The indicator turns off once and turns on again when a valid button is pressed. Only the first input button that is pressed will be registered.
Example: Press VIDEO 2.
continued
115GB