Notes

•This function does not work in following cases.

–MULTI IN is selected.

–Input signals of which the sampling frequency is more than 96 kHz are being received.

•If you set the NIGHT MODE to on during DTS 96/ 24 signal reception, it will play back only at 48 kHz.

Tip

While this function is on, the BASS, TREBLE, and EFFECT levels increase, and “D.RANGE COMP.” is automatically set to “MAX” (page 61).

Listening to the sound without any adjustment

(ANALOG DIRECT)

You can switch the audio of the selected input to 2 channel analog input. This function enables you to enjoy high quality analog sources.

When using this function, only the volume and front speaker balance can be adjusted.

 

Enjoying

A.DIRECT

Surround

 

Press A.DIRECT.

Sound

 

Analog audio is output. ANALOG DIRECT

 

function is toggled between on and off as you press

 

A.DIRECT.

 

To enjoy the analog sound source with noise free performance (Analog pureness control)

The Analog pureness control function bypasses the video and digital circuits that are not in use, and shuts down the power while the analog source is being played back. Thus, the Analog pureness control function provides noise-free audio performance and delivers high sound quality.

The Analog pureness control function is activated when you select an input source with no video input, then select “ANALOG” from INPUT MODE, and you press ANALOG DIRECT.

79GB