Enter the frequency of a station directly by using the numeric buttons.
1
3
2 4
1 Press TUNER repeatedly to select the FM or AM band.
2
3 Press the numeric buttons to enter the frequency.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
4 Press ENTER.
Tip
If you have tuned in an AM station, adjust the direction of the AM loop antenna (aerial) for optimum reception.
If you cannot tune in a station and the entered numbers flash
Make sure you have entered the right frequency. If not, repeat steps 2 to 4. If you still cannot tune in a station, the frequency is not used in your area.
You can preset up to 30 FM and 30 AM stations. Then you can easily tune in the stations you often listen to.
Presetting radio stations1
3,5 TunerOperations
4
1 Press TUNER repeatedly to select the FM or AM band.
2 Tune in the station that you want to preset using Automatic Tuning (page 82) or Direct Tuning (page 83).
Switch the FM reception mode, if necessary (page 82).
continued
83GB