Notes on playing a Super Audio CD on a Super Audio CD player

•No sound is output when playing a Super Audio CD on a Super Audio CD player connected to only the COAXIAL SA-CD/ CD IN jacks on this receiver. When you play a Super Audio CD, connect the player to the MULTI CHANNEL INPUT or SA-CD/CD IN jacks. Refer to the operating instructions supplied with the Super Audio CD player.

•You cannot make digital recordings of a Super Audio CD. Use the analog jack for recording in this case.

•When connecting optical digital cords, insert the plugs straight in until they click into place.

•Do not bend or tie digital optical cords.

If you want to connect several digital components, but cannot find an unused input

See “Listening to digital sound from other inputs (DIGITAL ASSIGN)” (page 94).

Tip

You cannot connect an LD player’s DOLBY DIGITAL RF OUT jack directly to this receiver’s digital input jacks. You must use an RF demodulator for this configuration.

Started Getting

23GB