Tuner Operations

Listening to FM/AM radio

You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas (aerials) to the receiver (page 38).

Tip

The tuning scale for direct tuning is shown below.

• FM band

100 kHz

• AM band

10 kHz*

* The AM tuning scale can be changed (page 125).

Automatic tuning

1

2

1Press TUNER repeatedly to select the FM or AM band.

2Press TUNING +/–.

Press TUNING + to scan from low to high, press TUNING – to scan from high to low.

The receiver stops scanning whenever a station is received.

82GB

In case of poor FM stereo reception

If the FM stereo reception is poor and “STEREO” flashes on the display, select monaural audio so that the sound will be less distorted.

Select “MONO” in “FM MODE” selection in the Tuner Settings menu (page 65).