Custom install mode parameters

xINSTALLER MODE (RS232C control)

Normally, set this to OFF.

•ON

The receiver can receive commands from the RS232C port.

•OFF

The receiver does not receive commands from the RS232C port.

x12V TRIG. MAIN

(12 V trigger for the main receiver)

Lets you turn the external equipment on or off by outputting 12V triggers when the receiver is turned on or off. For example, you can automatically unroll your video screen when you turn on the receiver.

•OFF

Lets you turn off output of 12V triggers even when the main receiver is turned on.

•CTRL

Lets you turn the output of 12V triggers on or off manually using the CIS command of the IR remote or RS232C control.

•ZONE

Lets you turn the output of 12V triggers for the main zone on or off.

•INPUT

Lets you turn on the output of 12V triggers when the preset input is selected.

To set the 12V trigger setting for each input

The initial setting of TAPE/CD-R, MD/DAT, SA-CD/CD, TUNER, and PHONO is “OFF.” The setting of TUNER is applied to the FM, AM, and XM Radio.

The initial setting of VIDEO 1-3, DVD, TV/ SAT, and HDMI 1 and 2 is “ON.”

1Select “INPUT” in “12V TRIG. MAIN.”

2Press to enter.

3Press V/v to select the input, then press to enter.

4Press V/v to select “ON” to activate the 12V trigger or select “OFF” to deactivate it.

5Press to enter.

6Repeat steps 3 to 5 when you want to make other settings.

100GB