Notes

•Sound adjustments do not affect the signal output from the TAPE/CD-R OUT or MD/DAT OUT jacks.

•The audio signals input to the MULTI CHANNEL INPUT jacks are output only from the front left/ right channels.

To record digital sound

Connect a component for playback to the digital audio input (OPTICAL IN) jack, and connect the recording component to the OPTICAL MD/DAT OUT jack.

Recording onto recording media

1 Press the input button of the playback component.

You can also use INPUT SELECTOR on the receiver.

2 Prepare the component for playing.

For example, insert the video tape you want to copy into the VCR.

3 Prepare the recording component.

Insert a blank video tape, etc. into the recording component (VIDEO 1 or VIDEO 2) for recording.

4 Start recording on the recording component, then start playback on the playback component.

Notes

•Some sources contain copy guards to prevent recording. In this case, you may not be able to record from the sources.

•The audio signals input to the MULTI CHANNEL INPUT jacks are output only from the front left/ right channels.

Custom install mode

This receiver features the custom install modes described below. Depending on how you intend to use these features, use of these modes may require additional equipment (available separately) or modification of your listening environment.

1

3-5

2

1 Press RECEIVER.

Receiver operation is enabled.

2 Press MENU.

The list of setting menus appears.

3 Press V/v repeatedly to select “System Settings,” then press .

4 Press V/v repeatedly to select the menu item, then press .

For details, see “System Settings menu parameters” (page 72).

5 Press V/v repeatedly to select the parameter you want, then press to enter.

6 Repeat steps 4 and 5 to adjust other items.

Operations Other

99GB