Starting macro play

1Press RECEIVER.

The RECEIVER button lights up, and then turns off.

2Press MACRO 1 or MACRO 2 to start the macro.

The macro starts and execute the commands in the order you assigned them. While the commands are being sent, the RM SET UP button flashes and the RECEIVER button lights up. When the commands have been sent, the RM SET UP and RECEIVER buttons turn off.

To erase a programmed macro

1Press MACRO 1 or MACRO 2 for more than 1 second while pressing RM SET UP to clear the stored macro.

The RM SET UP button flashes twice, repeatedly.

2Press RM SET UP.

Settings stored as macro are cleared.

Setting remote control codes that are not stored in the commander

Even if a remote control code is not one of the presets stored in the remote, it is possible for the remote to learn the code using the Learning function.

Note

When setting up the receiver to learn the remote command modes, replace the batteries with new ones.

1,6

1

2

Example for assigning button 1 to VIDEO 1 of the remote:

1 Press TV while pressing RM SET UP.

The RM SET UP button lights up.

2 Press the input button (VIDEO 1 in the example) for which you want to use the Learning input function.

The input button flashes. (The RM SET UP button remains lit.)

3 Press the button (button 1 in the example) you want to use as the VIDEO 1 button.

The input button you selected in step 2 lights up. (The RM SET UP button remains lit.)

continued

Remote the Using

113GB