Adjusting the speaker levels and balance

(TEST TONE)

You can adjust the speaker levels and balance while listening the test tone from your listening position.

Tip

The receiver employs a test tone with a frequency centered at 800 Hz.

1

3

2,

5-11

12

 

 

4

1 Turn on the receiver and TV.

2 Press ON SCREEN.

Switch the input of the TV so that the setting menu is displayed on the TV screen connected to this receiver.

3 Press RECEIVER.

Receiver operation is enabled.

4 Press MENU.

The list of setting menus appears.

5 Press V/v repeatedly to select “Level Settings,” then press to enter.

6 Press V/v repeatedly to select “TEST TONE,” then press .

7 Press V.

The test tone is output from each speaker in sequence.

Also, if you press v, the pattern will become the “FIX” pattern in which the test tone is output from the selected speaker only.

8 Press to enter.

9 Adjust the speaker level and balance using the Level Settings menu so that the level of the test tone sounds the same from each speaker.

For details on the Level Settings menu, see page 60.

Tips

•To adjust the level of all speakers at the same time, press MASTER VOL +/–.

•The adjusted value is shown on the display during adjustment.

10Press V/v repeatedly to select “TEST TONE,” then press .

11Press v to select “OFF,” then press .

The test tone turns off.

12Press ON SCREEN.

The menu setting display disappears.

80GB