Sony STR-DA3200ES 3,7, 6: Setting the speakers, Setting the speaker impedance, To switch the command mode of the RM-AAL003remote

To switch the command mode of the RM-AAL003 remote

1

2

3

1 Press ?/1 while pressing RM

SET UP.

The RM SET UP button flashes.

2 Press 1 or 2 while the RM SET UP button is flashing.

When you press 1, the command mode is set to AV SYSTEM 1. When you press 2, the command mode is set to AV SYSTEM 2.

3 Press ENTER when the RM SET UP button lights up.

The RM SET UP button flashes twice, then the command mode setting process is completed.

Tip

When you press RM SET UP, use a thin wire, such as a paper clip.

6: Setting the speakersSetting the speaker impedance

Set the appropriate speaker impedance for the speakers you are using.

1

2

4-6

3,7

1 Turn on the receiver.

2 Press RECEIVER.

Receiver operation is enabled.

3 Press MENU.

The list of setting menus appears.

4 Press V/v repeatedly to select “System Settings,” then press to enter.

5 Press V/v repeatedly to select “SP. IMPEDANCE,” then press

to enter the parameter.

continued

Started Getting

41GB