![](/images/new-backgrounds/1209433/20943361x1.webp)
For Machines Mfg. Since 7/09 | O P E R A T I O N | EVS Toolroom Lathes |
H.Cutting Fluid Flow Control Lever: Controls the flow of cutting fluid from the nozzle.
I.Compound Slide Handwheel: Moves the compound slide forward or backward. Includes an
J.Carriage Lock Bolt: Secures the carriage in place for greater rigidity and accuracy when using the cross or compound slide for the machining operation.
K.Thread Dial: Indicates when to engage the half nut during threading operations.
L.Thread Dial Chart: Indicates on which thread dial reading to engage the half nut for specific inch or Whitworth thread pitches.
M.Spindle ON/OFF Lever: Starts, stops and reverses direction of spindle rotation.
N.Half Nut Lever: Engages and disengages the half nut for threading operations.
O.Apron: Houses the carriage gearing and internal components.
P.Quick Change Feed Direction Knob: Changes apron feed direction without having to stop the lathe and move the headstock feed direction lever.
Q.Feed Control Lever: Engages and disengages the cross feed and carriage feed gearing.
R.Manual Carriage Oil Pump: Draws oil from the apron case and lubricates the carriage and ways through various oil ports.
S.Cross Slide Handwheel: Moves the cross slide toward or away from the workpiece. Includes an
T.Carriage Handwheel: Moves the carriage from
Control Panel
U V W X Y Z
Figure 36. Control panel.
U.Tachometer Display: Displays the current spindle speed in RPM.
V.Spindle Speed Dial: Changes the spindle speed within the set speed range.
W.Power Light: Illuminates when lathe is receiving power.
X.Cutting Fluid Pump Switch: Start/stops the cutting fluid pump motor.
Y.Jog Button: Turns the spindle motor ON while being pressed and held.
Z.Emergency Stop Button: Stops all machine functions. Twist clockwise to reset.