Lubricating Lathe, Adding Coolant | Southbend SB1042PF specification

Turn-Nado®EVS Lathes

P R E P A R A T I O N

For Machines Mfg. Since 3/11

Lubricating Lathe

GEARBOXES MUST

BE FILLED WITH OIL!

LATHE MAY NOT

HAVE OIL INCLUDED!

Refer to the Lubrication Section in this Manual for Recommended

Oil Type.

The headstock, quick-change gearbox, and apron oil reservoirs must have the proper amount of oil in them before the lathe can be operated for the ﬁrst time.

Damage caused to the bearings and gears from running the lathe without oil in the reservoirs will not be covered under warranty. Refer to the Lubrication section, beginning on Page 68, for details on how to check, add oil, and prime the headstock oil pump.

In addition to the reservoirs, we also recommend that you lubricate all other points on the machine at this time. This can be accomplished by following the maintenance schedule on Page 66.

Note: If this lathe was shipped with oil in the reservoirs, do not change that oil until after the test run and spindle break-in procedures.

Adding Coolant

Add the coolant of your choice now. For detailed instructions on where the coolant tank is located and how to add fluid, refer to Coolant System Service on Page 75.

Power Connection

After you have completed all previous setup instructions and circuit requirements, the machine is ready to be connected to the power supply.

Due to the complexity required for planning, bending, and installing the conduit necessary for a code-compliant hardwire setup, an electrician or qualified service personnel MUST perform this type of installation.

Hardwire setups typically require power supply wires to be enclosed inside of a solid or flexible conduit, which is securely mounted at both ends with the appropriate conduit fittings. All work must adhere to the required electrical codes.

The hardwire setup must include a locking disconnect switch (see Figure 21) between the power source and the machine. This switch serves as the means to completely disconnect the machine from power to prevent electrocution from accidental startup during adjustments, maintenance, or service to the machine.

		Locking
Power Source	Disconnect Switch		Machine
Conduit		Conduit

Figure 21. Typical hardwire setup with a locking

disconnect switch.

-30-

SB1042PF specifications

The Southbend SB1042PF is a high-performance commercial range designed specifically for culinary professionals who demand reliability, efficiency, and versatility in their kitchen equipment. This powerful range is engineered to provide outstanding cooking performance while featuring the robust build quality necessary for demanding food service environments.

One of the main features of the SB1042PF is its dual-fuel capability, combining the efficiency of gas burners with the precision of electric ovens. This hybrid approach allows chefs to enjoy the benefits of both cooking methods, such as rapid heating and responsive temperature control. The range typically comes equipped with four heavy-duty cast iron burners, each delivering 30,000 BTUs of cooking power. This ensures that specific dishes can be prepared quickly and efficiently, making this range suitable for high-volume kitchen operations.

In addition to the powerful burners, the SB1042PF features a convection oven that ensures even heat distribution. With a capacity of 26 inches, this oven is perfect for baking, roasting, and delivering consistent cooking results. The oven also includes a two-speed fan that enhances airflow, ensuring that dishes cook uniformly throughout.

The construction of the Southbend SB1042PF reflects its intention for heavy use. The stainless steel exterior not only adds a sleek look to any kitchen but also makes cleaning and maintenance a breeze. The durable cast iron burners are built for longevity, providing chefs with peace of mind even under intense kitchen conditions.

Innovative safety features are also incorporated into the SB1042PF. This range includes flame failure protection, which automatically shuts off the gas supply in case of an extinguished flame, ensuring that kitchens remain safe environments. Additionally, the oven has a temperature control system designed to allow precise adjustments, ensuring that cooking temperatures can match the chef's specifications.

Finally, the Southbend SB1042PF is designed with user comfort and convenience in mind. It features ergonomic controls, easy-to-read indicator lights, and a removable crumb tray for hassle-free cleaning. The range stands as a testament to Southbend's commitment to quality, performance, and innovation, making it an essential piece of equipment for any serious kitchen.

Southbend SB1042PF owner manual Lubricating Lathe, Adding Coolant, Power Connection

Models: SB1042PF