Gap Insert Removal & Installation, Gap Removal

Turn-Nado®EVS Lathes

S E R V I C E

For Machines Mfg. Since 3/11

11.Return the retaining ring against the shroud washer and position the retaining ring ears over the shear pin head, as shown in Figure 138. This will prevent the shear pin from falling out if the shroud washer should rotate during operation.

Figure 138. Retaining ring positioned with ears in

front of pin access groove.

Tools Needed:	Qty
Hex Wrenches 6mm	.............................................. 1
Hex Wrench 8mm	1
Wrench 17mm	1
Dead Blow Hammer	.............................................. 1

Gap Removal

1.Remove the four gap-bed cap screws, shown in Figure 140.

Dowel Pin

Jack Nut

Gap-Bed

Cap Screw

Way End

Cap Screw

Figure 140. Fasteners holding gap in place.

Gap Insert Removal & Installation

The gap insert directly under the spindle (see Figure 139) can be removed to create additional space for turning large diameter parts.

The gap insert was installed, then ground flush with the bed at the factory to ensure a precision fit and alignment. Therefore, if the gap insert is removed, it may be difficult to re-install with the same degree of accuracy.

Gap Insert

Figure 139. Gap insert.

2.Remove the two way-end cap screws.

3.Tighten the two dowel-pin jack nuts until the pins are pulled free from the gap insert.

4.Tap the outside of the gap insert with a dead blow hammer to loosen it, then remove it.

-86-

SB1042PF specifications

The Southbend SB1042PF is a high-performance commercial range designed specifically for culinary professionals who demand reliability, efficiency, and versatility in their kitchen equipment. This powerful range is engineered to provide outstanding cooking performance while featuring the robust build quality necessary for demanding food service environments.

One of the main features of the SB1042PF is its dual-fuel capability, combining the efficiency of gas burners with the precision of electric ovens. This hybrid approach allows chefs to enjoy the benefits of both cooking methods, such as rapid heating and responsive temperature control. The range typically comes equipped with four heavy-duty cast iron burners, each delivering 30,000 BTUs of cooking power. This ensures that specific dishes can be prepared quickly and efficiently, making this range suitable for high-volume kitchen operations.

In addition to the powerful burners, the SB1042PF features a convection oven that ensures even heat distribution. With a capacity of 26 inches, this oven is perfect for baking, roasting, and delivering consistent cooking results. The oven also includes a two-speed fan that enhances airflow, ensuring that dishes cook uniformly throughout.

The construction of the Southbend SB1042PF reflects its intention for heavy use. The stainless steel exterior not only adds a sleek look to any kitchen but also makes cleaning and maintenance a breeze. The durable cast iron burners are built for longevity, providing chefs with peace of mind even under intense kitchen conditions.

Innovative safety features are also incorporated into the SB1042PF. This range includes flame failure protection, which automatically shuts off the gas supply in case of an extinguished flame, ensuring that kitchens remain safe environments. Additionally, the oven has a temperature control system designed to allow precise adjustments, ensuring that cooking temperatures can match the chef's specifications.

Finally, the Southbend SB1042PF is designed with user comfort and convenience in mind. It features ergonomic controls, easy-to-read indicator lights, and a removable crumb tray for hassle-free cleaning. The range stands as a testament to Southbend's commitment to quality, performance, and innovation, making it an essential piece of equipment for any serious kitchen.

Southbend SB1042PF owner manual Gap Insert Removal & Installation, Gap Removal

Models: SB1042PF