VERIFYING SYSTEM
CONFIGURATION
To verify that all stations are communicating,
hold downuntil PAGING and the station numbers for all connected stations appear.
Be sure all the stations connected to Line 1 appear. If any station does not appear, make sure the lines to and from that station are connected and in the correct line jacks.
STATION RESET
If line conditions cause communication er- rors between stations, you might have to re- set the station(s).
To reset a station, insert the tip of a pen into RESET on the back of the phone. A click sounds and the display and station indicators briefly turn off, then back on.
Caution: Pushing RESET erases all data and system information.
CHANGING OR UPDATING A STATION EXTENSION NUMBER
You set the extension number
1.Press PROGRAM.
2.Select OTHER, then NEXT. SET STA- TION ID appears.
3.Select ENTER. SET STATION and the current extension number appear.
4.Repeatedly select CHANGE until the extension number desired
If the number is already used for another station, an error beep sounds and nn NOT AVAIL appears. Select CHANGE to select another number.
5.Select SAVE.
6.Press PROGRAM to exit.
SETTING THE PRIVATE LINE
You must connect Lines 1 and 2 to all the stations in the system for the intercom and paging features to work. However, when you create a
1.Press PROGRAM.
2.Select PHON, then select NEXT five times so PRIV LINE: OFF appears.
3.Select CHANGE, then ON/OFF to set the private line to ON. ON SELECT LN34 appears, and 34 flashes.
4.Use the number button to select the line that you do not want to be private. Your selection disappears.
5.Select SAVE.
6.Press PROGRAM to exit.
Note: If you want to make a conference call, you must set PRIV LINE to OFF.
SETTING THE RINGER
Ringer settings are individually set at each station for each line. When the ringer is on, the line rings when calls are received. When the ringer is off, that line does not ring when a call is received. Whether the ringer is
16 | Preparation | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
