press ON/OFF/STOP while the message is playing. The system stops playback and sets itself to answer the next call.
Note: If you press ON/OFF/STOP while the playback is already stopped, the system turns off the answering function.
Variable Speed Playback
Variable Speed Playback allows you to play your messages 25% faster or 25% slower. The pitch of the caller's voice remains un- changed.
1.Press VSP SLOW9to slow down, or VSP FAST8 to speed up. The message plays slower or faster than normal.
2.To resume normal playback, press the opposite button: press VSP SLOW9to
return from fast playback, press VSP FAST8 to return from slow playback.
DELETING MESSAGES
To delete the current message while retain- ing others, press ERASE during playback. You hear a beep to indicate the message is erased. After the “End of messages” an- nouncement, the message counter is updat- ed.
To delete all messages at once, press ERASE within 7 seconds after all messages have played. The TAD announces “I will erase messages,” and deletes all messages. The message counter returns to 00.
If you change your mind and decide not to delete all messages, press SAVE within 3 seconds after you press ERASE. The TAD announces “I will save messages.”
REMOTE OPERATION
Programming a Remote Access
Code
The TAD's
1.Press PROGRAM.
2.Select ANSW.
3.Select NEXT four times until REMOTE CODE appears.
4.Enter three digits, using the keypad. Select CHANGE.
5.Select SAVE.
6.Press PROGRAM to exit.
To check your remote access code, follow Steps
Using Remote Access
While you are away from your home or of- fice, you can use a
Press | To |
1Play All Messages
2Save All Messages
3Erase All Messages
*Skip Backward
#Skip Forward
The TAD hangs up after you enter your re- mote access code if no new messages were received.
TAD Operation | 35 |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
