On a Wall or Wall Plate | Sprint Nextel SP7084 specification

43-5708.fm Page 12 Monday, September 18, 2000 7:56 AM

four wall mount ports and push up to lock in place.

On a Wall or Wall Plate

1.Follow Steps 1–5 of “On a Desk.”

2.Turn the mounting bracket upside down, then insert the bracket into the bottom slots with the narrow end of the wedge pointing upward. Push the bracket up to lock into place.

3.Align the bracket’s keyhole slots with the wall plate studs, then slide the base downward to secure it.

Note: To mount the telephone directly on a wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base. Follow these steps for placement on a wall.

1.	Drill two holes 315/16			1/8
	inches apart.

	Thread two screws			315/16
	into the wall, letting

	the	heads	extend	1/8
	about 1/8 inch.

2.Follow Steps 1–5 of “On a Desk.”

3.Turn the mounting bracket upside down, then insert the bracket into the bottom slots with the narrow end of the wedge pointing upward. Push the bracket up to lock into place.

4.Align the keyhole slots on the telephone with the screws, then slide the telephone downward to secure it.

12			Installation

Image 12

Sprint Nextel SP7084 owner manual On a Wall or Wall Plate

Contents

SP708 4-Line Phone System Contents Memory Operation Troubleshooting Features TAD Telephone Answering Device Features Read this Before Installation FCC StatementFCC Wants YOU to Know Important Safety Instructions Lightning Fm Page 8 Monday, September 18, 2000 756 AM Quick Look at Your Phone Installation Square ConfigurationNon-Square Configuration Private Line Support Planning Your System Mounting the System On a Desk On a Wall or Wall Plate Installing the Backup Batteries Connecting the AC AdapterBattery Power Levels Attaching the Handset Connecting a FAX or PC Modem Setting UP the Stations Verifying the Station and Line ConfigurationsPreparation Verifying System Configuration Station ResetSetting the Private Line Setting the Ringer Setting the HANDSET, Headset and Speaker Volume Setting the Ringer VolumeSetting Always Ring Handset/Headset Volume Using a Headset Telephone OperationMaking Calls Answering Calls Transferring CallsConference Calling with Two Outside Lines Answering a Call While You Are On Another Line Using Auto Redial Using FlashUsing Hold With Announcement Using Mute Using the Intercom Using Standard Phones with the System Using Automatic AnswerPaging All Stations Monitoring Other Rooms Memory Operation Storing a Name and Number in MemoryEntering a Pause Editing Stored Numbers Chain-Dialing Service Numbers Testing Stored Emergency NumbersDialing a Stored Number Deleting Stored Numbers Caller ID Operation Programming Caller ID Reviewing Caller ID Records Dialing Numbers from a Caller ID RecordCaller ID Messages Storing a Caller ID Record in Memory Deleting RecordsCaller ID Operation with Auto Attendant on Auto Attendant Operation Assigning AN Auto Attendant Station Turning OFF Auto Attendant Auto Attendant Station Operation TAD Operation Recording GreetingsReviewing the Greetings Setting the Greeting Mode Selecting the Primary Greeting Setting the TAD to Answer Calls Setting the Greeting TimerSelecting the Number of Rings Call Screening Recording Incoming Messages Recording a Memo Recording a Conversation Playing Messages Programming a Remote Access Code Using Remote AccessDeleting Messages Remote Operation Troubleshooting Problem Solution Troubleshooting Performing a System Update Resetting the Time and Date Care Limited One-Year Warranty