12 | - |
.wo
3 - The top setting is used when you want to load paper in the printer.
P - The second setting is for normal single sheets. C - The third is for
4lU- The bottom one is used when you want to release the paper completely to adjust it.
Release lever
‘igure
.
contmuous paper.
The paper bail holds the paper against the platen according to the setting of the release lever. The bail is opened when the release lever is in the top position, closed when the lever is in the second or third positions, and opened by the printer when the lever is in the bottom position.
nLoading single sheets
Instead of feeding the paper in manually by turning the platen knob, you can use the release lever for automatic feeding (the printer must be turned on)Single. sheets from 5.5 to 8.5 inches wide can be used:
1.Flip the clamp Levers backward and move the sprockets on the tractor feed unit all the way to the ends.
