Sun Microsystems X4640 manual Mouse Settings When Using SIA with Ilom Remote Console

Mouse Settings When Using SIA with ILOM Remote Console

■Remotely using a PXE-based image: If you are using PXE network booting to load the Sun Installation Assistant image from a Linux-based PXE server, proceed to “Performing an SIA PXE-Based Attended Installation” on page 39 or “Performing an SIA PXE-Based Unattended Installation” on page 43.

Note – The instructions below assume local CD/DVD drive access. Be sure to modify the instructions accordingly if you are using a local USB flash drive prepared with SIA software, or if you are running SIA from a remote console (or KVMS) with CD-ROM redirection.

As SIA starts, you will see various start up messages and then the Software License Agreement dialog will be displayed.

2In the Software License Agreement dialog, click Accept to accept the license agreement, and then click Next.

The SIA Welcome dialog appears identifying the tasks that the Sun Installation Assistant performs.

3In the SIA Welcome dialog, click Next to proceed with the installation.

17