Chapter 5: Advanced Serverboard Setup
HDD LED
The HDD (IDE Hard Disk Drive) LED connection is located on pins 13 and 14 of JF1. Attach the IDE hard drive LED cable to display disk activity. Refer to the table on the right for pin definitions.
HDD LED
Pin Definitions (JF1)
Pin# Definition
13Vcc
14HD Active
NIC1 LED
The NIC1 (Network Interface Control- ler) LED connection is located on pins 11 and 12 of JF1. Attach the NIC1 LED cable to display network activity. Refer to the table on the right for pin definitions.
NIC1 LED
Pin Definitions (JF1)
Pin# Definition
11Vcc
12Ground
NIC2 LED
The NIC2 (Network Interface Control- ler) LED connection is located on pins 9 and 10 of JF1. Attach the NIC2 LED cable to display network activity. Refer to the table on the right for pin definitions.
Overheat/Fan Fail LED (OH)
Connect an LED to the OH connection on pins 7 and 8 of JF1 to provide ad- vanced warning of chassis overheat- ing or fan fail. Refer to the table on the right for pin definitions.
NIC2 LED
Pin Definitions (JF1)
Pin# Definition
9Vcc
10Ground
OH/Fan Fail LED
Pin Definitions (JF1)
Pin# Definition
7Vcc
8Ground
