SUPER MICRO Computer 6025B-3R Drive Bay Installation/Removal, Accessing the Drive Bays

SUPERSERVER 6025B-3/6025B-3R User's Manual

Figure 6-2. Removing a System Fan

6-4 Drive Bay Installation/Removal

Accessing the Drive Bays

SAS Drives: You do not need to access the inside of the chassis or remove power to replace or swap SAS drives. Proceed to the next step for instructions.

Note: You must use standard SAS drives in the SuperServer 6025B-3/6025B-3R.

DVD-ROM/Floppy Disk Drive: For installing/removing the DVD-ROM or floppy disk drive, you will need to gain access to the inside of the server by removing the top cover of the chassis. Proceed to the "DVD-ROM and Floppy Drive Installation" section later in this chapter for instructions.

3.5" Drive Bay: For installing/removing a component in the 3.5" drive bays, proceed to the "3.5" Drive Bay Installation" section later in this chapter for instructions.

6-4