Sybase 15.0.2 manual System requirements

System requirements

3Perform the installation using any of the methods described in “Installation methods” on page 27.

4Perform the post-installation tasks as described in Chapter 3, “Post- Installation Tasks.”

System requirements

Check to make sure your system has the required version-level, RAM, and network-protocol requirements for Adaptive Server. See the release bulletin for your platform the latest information about required system patches.

Table 2-1: Server system requirements
Hardware	Operating system	Supported protocols
HP9000/700, or HP9000/800, or 64-bit HP9000	HP-UX 11.i running 64-bit	SPX or TCP
D, K, V Series, (The PA8000 chip is required.)	runtime kernel
HP	HP-UX 11iV2	SPX or TCP
HPIA64, Intel Architecture-64 Itanium	HPUX B.11.23	SPX or TCP

Table 2-2: Disk space requirements for HP-UX 64-bit PA RISC platforms
Product	Disk space requirements
Adaptive Server typical install	700MB
Default databases created during install	150MB
Total	1040MB

Table 2-3: Disk space requirements for HP-UX 64-bit Itanium platform
Product	Disk space requirements
Adaptive Server typical install	700MB
Default databases created during install	150MB
Total	1040MB

	Table 2-4: Server system requirements
Operating system	Hardware		Supported protocols
Windows 2000 Pro, Server,	•	Intel Pentium III 600 MHz or higher	•	TCP
Adv.Server and DataCenter	•	AMD Athlon 1 GHz or higher	•	IPX/SPX

Edition SP4 or higher

• Named pipes (not supported for LDAP server connections

14 Adaptive Server Enterprise