TANDBERG 700 MXP user manual Isdn BRI warnings, IP network quality warnings, Isdn PRI warnings

TANDBERG 7000 MXP

3.13.8Warnings

Any warnings registered by the system will be displayed in the Warnings menu. Open a warning in the list to get more information about the warning.

The following warnings may be displayed if detected by the system, depending on system type and configuration:

ISDN BRI warnings

ƒISDN is enabled on BRI line x, but the line is not connected. Please check your network connection or disable the line. (101)

ƒThere is something wrong with ISDN BRI line x. Please check your network connection. (102)

IP network quality warnings

ƒThe system is experiencing, equal to or more than 5%, packet loss in the IP network. This may affect the quality of the call.

ƒThe system is experiencing high jitter, equal to or more than 200 ms, in the IP network. This may affect the quality of the call.

ƒThe system is dropping IP packets due to latency in the network. This may affect the quality of the call.

ISDN PRI warnings

ƒISDN PRI is configured for this system, but the line is not connected. Please check your network connection or disable the network. (131)

ƒThere is something wrong with the ISDN PRI line (Blue alarm). Please check your network connection. (132)

ƒThere is something wrong with the ISDN PRI line (Yellow alarm). Please check your network connection. (133)

ƒThere is something wrong with the ISDN PRI line (D-Channel not active). Please check your network connection. (134)

External Network warnings

ƒExternal Network is configured for this system, but the line is not connected. Please check your network connection or disable the network. (161)

Leased E1/T1 warnings

ƒLeased E1/T1 is configured for this system, but the line is not connected. Please check your network connection or disable the network. (191)

ƒThere is something wrong with the Leased E1/T1 line (Blue alarm). Please check your network connection. (192)

104