
Peripheral Equipment
The pinout of the E1/T1 interface is:
PRI
Pinout
Crossover PRI cable
RX+ | 4 | |
RX- | 5 | |
TX- | 1 | |
TX+ | 2 |
Note! TANDBERG recommends always using category 5 cabling.
NET Interface:
1 x X.21 / V.35 / RS449 with 1 x RS366 Call Control up to 2 Mbps
V35:
V.10 (RS423).
For balanced signals a "0"=low voltage is defined as terminal A positive with respect to terminal B.
For unbalanced signals a "0"= low voltage is defined as terminal positive with respect to GND.
Cable length max: Leased Line Control = 20 Meter
227